Primer for external 3layers system for polyethylene (Primer + Adhesive+ P.E.). The product cures at temperatures between +100 and +170 °C in oven.
The product provides good resistance to cathodic disbonding and excellent polyethylene adherence values to the pipe surface.
Substrate: Steel, correctly prepared
Qualified product – Refer to TDS
| Solids content by volume | 96 ± 1% |
| Application | On line application by round die, On line distribution by spatula (side band spatula distribution ), Standard Airless Spray |
| Shelf-life* @ +8/+10 °C | 3 Months (* The material must be stored at temperatures between +8 / +10 °C in dedicated cold room ) |
| Typical thickness | 25-50 µm DFT |
Safety data sheet
Fill out the request below in order to receive the safety data sheet