STOPCOAT 71 Atex is a galvanizing, epoxy polyamide product of organic type, zinc dust rich in the dry film.
Studied to function as primer for several anticorrosion coating systems operating in severe environmental conditions, this product is recommended when the service temperature resistance is required.
Stopcoat 71 Atex is an organic zinc primer based on epoxy-polyamide resins with a high zinc metallic content in the dry film and modified with special dissipative fillers which make the fully cured paint compliant with the requirements of EN IEC 60079-0 and EN ISO 80079-36 (use of non-metallic materials in dangerous explosive atmospheres due to the presence of gases including those of IIC group according to EN ISO 80079-36).
Conceived as a primer for numerous anti-corrosion systems operating in severe environmental conditions, it finds its use in those situations where resistance to operating temperatures is important.
| Specific Gravity A+B | Kg/l 2,7 ± 0,1 @ +20°C |
| Solids by Weight | 87 ± 2% A+B |
| Solids by Volume | 59 ± 2% A+B |
| Mixing Ratio by Weight | 90 parts of Base / 10 parts of Hardener |
| Pot life @ +20°C | ≥ 6 hours |
| Temperature Resistance In Air, Dry conditions | Continuous: + 150 °C / Occasional (Picks): + 200 °C |
| Colour | Grey |
Safety data sheet
Fill out the request below in order to receive the safety data sheet